Revata Engineering

Announcement Board - Revata Engineering

Spares For Gas Lift Valves
Delivering Reliable Solutions

 

 


Spares For Gas Lift Valves


 

Revata Engineering manufactures and supplies a wide range of Spares & Redress Kits for Gas Lift Valves. These Spares & Redress Kits are compatible for use with Gas Lift Valves manufactured by various companies such as Camco, Bowen, Weatherford, Macco, BOT etc.

 

Our Gas Lift Valve Spares & Redress Kits are available for various Gas Lift Valves in 1" or 1.5".

 

Below are some of the Gas Lift Valve Spares & Redress Kits supplied by us:

 

 

Valve Cores, Drill Core Valves - Spares For Gas Lift Valves

 

Valve Cores, Drill Core Valves - Spares For Gas Lift Valves VALVE CORES / DRILL CORE VALVES:

The Valve Core / Drill Core Valves are used in both 1" and 1.5" Gas Lift Valves.

 

The valve core is made up of 3 main pieces:

 The bridge for screwing the valve core into its housing.
 The seat with its joint providing a static seal from the valve body.
 The valve with its spring for introducing or draining fluid and guaranteeing sealing under pressure in the rest position.

Valve Cores, Drill Core Valves - Spares For Gas Lift Valves

 

 

Check Dart - Spares For Gas Lift Valves

 

Check Dart - Spares For Gas Lift Valves CHECK DART:

Revata Engineering manufactures Check Darts for both 1" and 1.5" Gas Lift Valves in various materials such as:
Check Dart - Spares For Gas Lift Valves Special Cast Steel
Check Dart - Spares For Gas Lift Valves Monel K500
Check Dart - Spares For Gas Lift Valves Monel 400

Other grades are available based on customer requests.

 

 

Check Pads - Spares For Gas Lift Valves

 

Check Pads - Spares For Gas Lift Valves CHECK PADS:

Revata Engineering manufactures Check Pads for both 1" and 1.5" Gas Lift Valves in various materials depending on the application and well conditions. Some of the materials available are:
Check Pads - Spares For Gas Lift Valves Viton
Check Pads - Spares For Gas Lift Valves NBR

 

 

3 Ply Bellows - Spares For Gas Lift Valves

 

 

3 Ply Bellows - Spares For Gas Lift Valves SPECIAL 3 PLY BELLOWS:

Revata Engineering provides Bellows specially developed for 1" and 1.5" Gas Lift Valves. These bellows are manufactured using special 3 Ply Monel metals. They are designed and manufactured to meet strict industry standards and withstand the demands for the application.

 

Tungsten Carbide Seats - Spares For Gas Lift Valves

 

 

Tungsten Carbide Seats - Spares For Gas Lift Valves TUNGSTEN CARBIDE SEATS:

Revata Engineering manufactures Tungsten Carbide Seats in a wide variety of configurations and specifications for use in wear, corrosive and erosive conditions. The seats that we ship have a finished port area and is pressure tested so that a positive ball/seat seal is achieved.

 

Tungsten Carbide Seats - Spares For Gas Lift Valves We manufacture seats for standard 1" Valves in port sizes from 1/8” upto 3/8”.
Tungsten Carbide Seats - Spares For Gas Lift Valves We manufacture seats for standard 1 1/2” in port sizes from 1/8” upto 1/2”.

Tungsten Carbide Seats - Spares For Gas Lift Valves We manufacture custom made seats as per your specific drawings and material specifications.

 

 

Retainer Rings - Spares For Gas Lift Valves

 

 

Retainer Rings - Spares For Gas Lift Valves RETAINER RINGS:

Revata Engineering manufacturers Retainer Rings for both 1" and 1.5" Gas Lift Valves. These are manufactured using a special Copper Grade specifically suited for this application. Please contact us for more details on this product.

 

Tungsten Carbide Balls - Spares For Gas Lift Valves

 

 

Tungsten Carbide Balls - Spares For Gas Lift Valves TUNGSTEN CARBIDE BALLS:

Revata Engineering manufactures and stocks tungsten carbide balls from size 5/32” upto 5/8” in Carbide Grade 25.

The TC Balls are manufactured as per Anti-Friction Bearing Manufacturer Association (AFMBA) standards.

Standard sized balls in 6% Cobalt material are readily available in stock with us.

 

Roll Pins - Spares For Gas Lift Valves

 

 

Roll Pins - Spares For Gas Lift Valves ROLL PINS:

Revata Engineering manufactures Roll Pins for both 1" and 1.5" Gas Lift Valves.

 

Shear Pins - Spares For Gas Lift Valves

 

 

Shear Pins - Spares For Gas Lift Valves SHEAR PINS:

Revata Engineering manufactures Shear Pins for both 1" and 1.5" Gas Lift Valves.

 

Gas Lift Valve Vee-Packing - Spares For Gas Lift Valves

 

 

Gas Lift Valve Vee-Packing - Spares For Gas Lift Valves GAS LIFT VALVE VEE PACKING SET:

Revata Engineering manufactures and supplies Vee-Packing Set along with required Vee-Packing adapters for both 1" and 1.5" Gas Lift Valves.

The Vee-Packings are made out of a special blend giving them extremely high strength and resistance to wear and tear while performing under harsh downhole environments and maintaining their performance factor at the same time.



 

Gas Lift Valve Redress Kits - Spares For Gas Lift Valves

 

 

Gas Lift Valve Redress Kits - Spares For Gas Lift Valves GAS LIFT VALVE REDRESS KITS:

Revata Engineering manufactures Redress Kits for both 1" and 1.5" Gas Lift Valves.

The Redress Kits consists of a set of Wear-components required to repair / refurbish the worn-out components of the Gas Lift Valves.

 

 

 

Alternatively, you may fill up the below Quick-Response Form to request more information on the above product:



Full Name* :  
Company* :  
Phone* :  
Country* :  
Email Address* :  

Additional   Information :  

Image  
Verification  
 


SECURITY FEATURE:
Please enter the image you seen below in the
form field below.

 


[Show Another Image]

 

Camco, Weatherford, Bowen, Macco and Baker Oil Tools (BOT) are registered trade marks of their respective companies.

 

 

 

 

 

PRODUCT QUICK LINKS:

INNER & OUTER BOP SEALSSWAB CUPSPACKER ELEMENTSDRILL PIPE WIPERSKELLY WIPERSSUCKER ROD WIPERSSUCKER ROD GUIDESOIL SAVER RUBBERSTUFFING BOX PACKINGSSLICKLINE BLOW OUT PLUGSCOUPLINGS FOR LINE PIPES (API THREADS)COUPLINGS FOR TUBING (EUE, NUE, BTC)COUPLINGS FOR CASING (STC, LTC, BTC)PUP JOINTSCAST STEEL LIFTING BAILS / LIFTING NUBBINS / SUBSLIFT PLUGSLIFT SUBSROTARY SUBSTOOL JOINTS1" & 1.5" CONVENTIONAL / TUBING RETRIEVABLE IPO GAS LIFT VALVES1" & 1.5" WIRELINE RETRIEVABLE IPO GAS LIFT VALVES1" & 1.5" WIRELINE RETRIEVABLE DUMMY VALVES1" & 1.5" BK-2 WIRELINE RETRIEVABLE LATCHES1" & 1.5" ORIFICE VALVESSPARES FOR GAS LIFT PLASTIC THREAD PROTECTORSCOMPOSITE THREAD PROTECTORSSTEEL THREAD PROTECTORSPACKAGING FRAMES FOR TUBINGS AND CASINGSPACKAGING FRAMES FOR HEAVY DRILL PIPESPACKAGING FRAMES FOR DRILL PIPES (COMMON)PACKAGING FRAMES FOR DRILL PIPES (STANDARD SIZE)PLASTIC THREAD PROTECTORS FOR TUBINGSTHREAD PROTECTOR FOR DRILL PIPE (PLASTIC TYPE, CLOSED END /CE)COMPOSITE THREAD PROTECTOR FOR TUBING & CASING (CENL)COMPOSITE THREAD PROTECTOR FOR TUBING & CASING (CEL)COMPOSITE THREAD PROTECTOR FOR DRILL PIPE (CE)CAST STEEL LIFTING CAPSTUBULAR BUMPER RINGSCLAMP ON CASING PROTECTORCASING & TUBING PACKAGING FRAMESDRILL PIPE PACKAGING FRAMESTUBULAR PACKAGING AND LIFTING FRAMESTUBULAR END CAPS / PIPE CAPSFLANGE PROTECTORS / FLANGE COVERSCAPS & PLUGS FOR HYDRAULIC FITTINGS (NPT, BSP, JIC etc)PVC / VINYL END CAPS & PROTECTORSREDRESS KITS FOR DOWNHOLE TOOLS'V' PACKINGSCOMPOSITE SEALSO-RINGSO-RING CORDSHAMMER UNION SEALSRING JOINT GASKETS - INTRODUCTIONR TYPE RING JOINT GASKETS (OVAL)R TYPE RING JOINT GASKETS (OCTAGONAL)RX TYPE RING JOINT GASKETSBX TYPE RING JOINT GASKETSSPIRAL WOUND GASKETSDESANDERS & SPARESDESILTERS & SPARESPLUNGER PUMP SPARESMUD PUMP SPARESCEMENTING / WIPER PLUGSWIPER PLUGS / ELEMENTSSTANDARD STRAIGHT BOW CENTRALIZERSRIGID BOW CENTRALIZERSSOLID RIGID CENTRALIZERSCENTRALIZER / STABILIZER JOINTSSTOP COLLARSTUNGSTEN CARBIDE VALVE SEATSTUNGSTEN CARBIDE BALLSTUNGSTEN CARBIDE SEAT INSERTSCUSTOM MADE / SPECIALTY CARBIDE PARTS

 

 


Privacy Policy    I   Disclaimer & Terms
Copyright © 2009 Revata Engineering