Revata Engineering

Announcement Board - Revata Engineering

Wireline Retrievable BK-2 & RK-2 Latches For Gas Lift Valves, Wireline Retrievable IPO Valves, Conventional Gas Lift Valves, GLV
Delivering Reliable Solutions

 

 


Wireline Retrievable BK-2 & RK-2 Latches For Gas Lift Valves, Wireline Retrievable IPO Valves, Conventional Gas Lift Valves, GLV


Wireline Retrievable BK-2 & RK-2 Latches For Gas Lift Valves, Wireline Retrievable IPO Valves, Conventional Gas Lift Valves, GLV

 


Revata Engineering offers a wide variety of latches for installing wireline retrievable devices in side pocket mandrels. These Latches are manufactured to meet the requirements of API 11V1. They are specifically designed to lock in place when located in either 180 degree or 360 degree latching pocket profile.

 

To retrieve a latch and attached flow control device, upward jarring of the tool string sheers the release shear pin permitting the locking mechanism to disengage from the latch locking profile.


180 degree latch pocket profile have a spring loaded ring style latching mechanism. A ported ID is included in some designs for applications requiring a communication path between the latch and top of the attached flow control device.



BK-2 LATCH:
The BK-2 latch is used to secure a 1" O.D. valve or dummy in the mandrel. The latch is a spring loaded, ring style latch which locks in place when the latch reaches the recess in the mandrel receiver pocket. A pin is sheared to release the latch body (a dual pupose locking and retrieving part of the latch) allowing the ring to move upward permitting the retrieval of the valve or dummy.

 

Valve Pocket ID

Latch Model Latch Mechanism Running Head OD

Fishing Neck OD

Maximum Running

In mm.     In. mm. In. mm. In. mm.
1 25.4 BK-2 Lock Ring 0.750 19.10 0.875 22.20 1.358 34.50

 

 


RK-2 LATCH:
The RK-2 latch is used to secure a 1.1/2" O.D. valve or dummy in the mandrel. The latch is a spring loaded, ring style latch which locks in place when the latch reaches the recess in the mandrel receiver pocket. A pin is sheared to release the latch body (a dual pupose locking and retrieving part of the latch) allowing the ring to move upward permitting the retrieval of the valve or dummy. In addition the latch sub contains two O-rings which provide a better top seal and debris barrier.


Valve Pocket ID

Latch Model Latch Mechanism Running Head OD

Fishing Neck OD

Maximum Running

In mm.     In. mm. In. mm. In. mm.
1.5 38.1 RK-2 Lock Ring 0.936 23.70 1.186 30.12 1.78 45.21

 

 

SPECIFICATIONS:

Wireline Retrievable BK-2 & RK-2 Latches For Gas Lift Valves, Wireline Retrievable IPO Valves, Conventional Gas Lift Valves, GLV Standard material is stainless steel, with Monel® or Inconel® optional.

Wireline Retrievable BK-2 & RK-2 Latches For Gas Lift Valves, Wireline Retrievable IPO Valves, Conventional Gas Lift Valves, GLV Has 11/16"-16 UNS-2B threads to mate with all common 1" gas lift valves.

Wireline Retrievable BK-2 & RK-2 Latches For Gas Lift Valves, Wireline Retrievable IPO Valves, Conventional Gas Lift Valves, GLV Use standard top latches.

 

INCONEL® and MONEL® is a trademark of Special Metals Corporation.

 

 

 

Alternatively, you may fill up the below Quick-Response Form to request more information on the above product:



Full Name* :  
Company* :  
Phone* :  
Country* :  
Email Address* :  

Additional   Information :  

Image  
Verification  
 


SECURITY FEATURE:
Please enter the image you seen below in the
form field below.

 


[Show Another Image]

 

 

 

 

 

PRODUCT QUICK LINKS:

INNER & OUTER BOP SEALSSWAB CUPSPACKER ELEMENTSDRILL PIPE WIPERSKELLY WIPERSSUCKER ROD WIPERSSUCKER ROD GUIDESOIL SAVER RUBBERSTUFFING BOX PACKINGSSLICKLINE BLOW OUT PLUGSCOUPLINGS FOR LINE PIPES (API THREADS)COUPLINGS FOR TUBING (EUE, NUE, BTC)COUPLINGS FOR CASING (STC, LTC, BTC)PUP JOINTSCAST STEEL LIFTING BAILS / LIFTING NUBBINS / SUBSLIFT PLUGSLIFT SUBSROTARY SUBSTOOL JOINTS1" & 1.5" CONVENTIONAL / TUBING RETRIEVABLE IPO GAS LIFT VALVES1" & 1.5" WIRELINE RETRIEVABLE IPO GAS LIFT VALVES1" & 1.5" WIRELINE RETRIEVABLE DUMMY VALVES1" & 1.5" BK-2 WIRELINE RETRIEVABLE LATCHES1" & 1.5" ORIFICE VALVESSPARES FOR GAS LIFT PLASTIC THREAD PROTECTORSCOMPOSITE THREAD PROTECTORSSTEEL THREAD PROTECTORSPACKAGING FRAMES FOR TUBINGS AND CASINGSPACKAGING FRAMES FOR HEAVY DRILL PIPESPACKAGING FRAMES FOR DRILL PIPES (COMMON)PACKAGING FRAMES FOR DRILL PIPES (STANDARD SIZE)PLASTIC THREAD PROTECTORS FOR TUBINGSTHREAD PROTECTOR FOR DRILL PIPE (PLASTIC TYPE, CLOSED END /CE)COMPOSITE THREAD PROTECTOR FOR TUBING & CASING (CENL)COMPOSITE THREAD PROTECTOR FOR TUBING & CASING (CEL)COMPOSITE THREAD PROTECTOR FOR DRILL PIPE (CE)CAST STEEL LIFTING CAPSTUBULAR BUMPER RINGSCLAMP ON CASING PROTECTORCASING & TUBING PACKAGING FRAMESDRILL PIPE PACKAGING FRAMESTUBULAR PACKAGING AND LIFTING FRAMESTUBULAR END CAPS / PIPE CAPSFLANGE PROTECTORS / FLANGE COVERSCAPS & PLUGS FOR HYDRAULIC FITTINGS (NPT, BSP, JIC etc)PVC / VINYL END CAPS & PROTECTORSREDRESS KITS FOR DOWNHOLE TOOLS'V' PACKINGSCOMPOSITE SEALSO-RINGSO-RING CORDSHAMMER UNION SEALSRING JOINT GASKETS - INTRODUCTIONR TYPE RING JOINT GASKETS (OVAL)R TYPE RING JOINT GASKETS (OCTAGONAL)RX TYPE RING JOINT GASKETSBX TYPE RING JOINT GASKETSSPIRAL WOUND GASKETSDESANDERS & SPARESDESILTERS & SPARESPLUNGER PUMP SPARESMUD PUMP SPARESCEMENTING / WIPER PLUGSWIPER PLUGS / ELEMENTSSTANDARD STRAIGHT BOW CENTRALIZERSRIGID BOW CENTRALIZERSSOLID RIGID CENTRALIZERSCENTRALIZER / STABILIZER JOINTSSTOP COLLARSTUNGSTEN CARBIDE VALVE SEATSTUNGSTEN CARBIDE BALLSTUNGSTEN CARBIDE SEAT INSERTSCUSTOM MADE / SPECIALTY CARBIDE PARTS

 

 


Privacy Policy    I   Disclaimer & Terms
Copyright © 2009 Revata Engineering